Our ELECTRICAL TECHNOLOGIES support commercial, industrial and institutional facilities. Services include electrical troubleshooting and diagnostics to maintain equipment and components.

- SERVICE
- DESIGN
- INSTALLATION
- RENOVATION

> Thermography – Infrared Inspections

> Preventive Maintenance Programs

> Transformers – Step Up and Step Down

> Generators – Back-up Power and Standby Power

> Motor Controls – Programmable and Electric

> Programmable Logic Controls – Hard Wiring

> Switchgear, Main Circuits and Switches

> Transient and Surge Protection

> Occupancy Sensors, Time Clocks and Photocells for Lighting

> Material Handling

> Lighting Design, Efficiency Upgrades and Group Relamping

> Communication Conduit and Wiring

SYSTEM INSPECTION

> Diagnose and Troubleshoot System Operation
> Inspect Equipment and Components
> Evaluate Electrical Requirements, Power Quality and Line Monitoring
> Evaluate Power Monitoring Equipment
> Perform Power System Audits

We offer turnkey electrical solutions in technical production environments and commercial facilities. Reliability is assured by working with our experienced professional in-house electricians.





Electrical Technologies Sample Projects

1200-AMP SERVICE
Designed and installed a new 1200-amp, 120/208-volt, 3-phase, 4-wire electrical service to upgrade the existing service at an international bridge and marine contractor’s US corporate office. Included in the project was a 600-amp sub fed panel and push-button starters for all motor loads. All circuits in the existing 800-amp motor control center (MCC) were transferred to the new 1200- and 600-amp panels. The transfer of circuits was carefully coordinated and performed over a weekend to minimize downtime and facilitate the transfer of electrical service from the local power utility.

ELECTRICAL FOR RELOCATED RUTIL AND BOY PRESSES
Set and installed Rutil and Boy molding presses. Extended the existing chilled water piping, electrical service and conduit to the new press locations and tied them into the presses. The projects included providing 480 volt, 3 phase, 200 amp electrical service from the overhead busway disconnects, installing compressed air lines to the press locations tieing in all controls. Fabricated and installed one service rack for each press.

NEW PLANT ELECTRICAL AND HVAC
Assisted in design, engineering and installation of electrical service and HVAC for a 45,000 square foot shell building. Electrical service included new switchgear, a 300-amp busway as well as all panels, 4000 amp service, underground conduits and wiring and parking lot pole lighting. For the gas bunkers adjacent to the building several hundred feet of high-pressure gas lines, control units and ventilation were installed.

OCCUPANCY SENSOR FOR LIGHTING CONTROL
Installed occupancy sensor for lighting control of second floor production observation area for a seafood processing plant. Controls provide energy savings because the observation area is not utilized during all plant shifts.


Service or Estimate Request

Service or Estimate Request

For our afterhours and emergency services please call 800-866-4041.

You will be connected immediately and our technician will respond to your call.

Note: * indicates a required field